Destroy disposable syringe to reject cross infection completely While melting the needle, insert the needle into the melting hole, and then press down the syringe gently when the needle touches the electrodes inside.
While the needle is being melted, there will be spark and the needle indicator will be flashing for about three seconds, which is a normal phenomena;
It has the overheat protection function to protect machine work normally while melting the needle;
The residual liquid in the needle will be vaporized instantly during melting, The "working indicator" is flashed when melting the needle, which means the needle is being melted and the whole process lasts 1-3 seconds;
While cutting the head of the syringe body, insert the syringe into the hole and pull the handle to cut it off.
The whole process lasts 3 seconds.
Dealing with the waste residue:
There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue.
Please clean the rubbish drawer after using some time (usually after melting 50PCS of syringes).
Press the drawer gently at the bottom, which will flick automatically, then clean out the waste residueand install again.
AC/DC: Low voltage electric shock can melt the needle instantly; Double superheating protection is provided;
Surplus liquid in the syringe can be boiled off instantly and no pollution;
There will some electrical spark which is normal during melting;
Indicator light sparks during melting, showing the needle is under destroying, the whole process is finished in 1 to 3 seconds.
Power: AC 110V± 10%/220V± 10% DC 6V
Melting method: Melt with low pressure, high temperature
Melting efficiency: Take 20ml syringe body as reference, can melt syringe (ø 1.2mm length 35mm) approximately 3 seconds;
Working time: Can destroyer around 240 continuously (take 20ml syringe body as reference)
Working noise: ≤ 50 decibel
Electrode chip working voltage: AC 6.5V/ AC 8V
Power: ≤ 130VA
Electrode chip superheating protection temperature: 85 degree/95 degree
Scope of application:
Disposable syringes, disposable needles, disposable scalp needle, disposable infusion (blood) plastic tubes, etc.
This machine has a fast-melting metal needle, and syringe needles and rubber plug bad cut, and can initially cut the plastic tube-shaped effect of multiple damage.
1. AC220V will be three-core power into the outlet, open the back switch, power indicator light red.
2. Syringe with a needle can be inserted into the right cutting room suppress the syringe to move forward, that is, electrical work to hear the voice, this time the work of bright green light to continue to move forward to complete the cut, withdraw the syringe destroyed.
Scalp needles and other needle directly into the melt in the mouth can be a positive melting, in the operation to be light-switch needles, easy to melt faster.
3. For the tubular plastic cutting room directly on the left can be pulled off.
4. Are used up, turn off power, unplug the power cord.