Vertical or Wall Mounted Electric Distiller are sturdily constructed in rustproof, heavy gauge stainless steel for use in rugged condition. Its a unique vessel that generates steam under pressure and temperature between 120°C to 135°C. On reaching the right temperature the instruments are subject to a saturated steam environment for a pre-specified time which results in safe and guaranteed sterilization. Available in various models and sizes from 6 liters capacity to 150 liters capacity to suit different application. These can be used on electricity as well as on any external heat source such as kerosene stove, gas burner, wood & charcoal.
Vertical or Wall Mounted Electric Distiller
Vertical or Wall Mounted Electric Distiller
Model: WD-LH5, WD-LH10, WD-LH20
Available Volume: 5 liters/hour, 10 liters/hour, 20liters/hour
This device can be mounted on wall or floor-stand at the ground, designed to
minimize the economic cost to get efficient high quality distilled water automatically.
Instructions and Principle of Vertical or Wall Mounted Electric Distiller WD-LH :
1. The apparatus is automatically controlled, without supervision.
2. Nice appearance, and can be viewed the inside of the evaporation container from the upper glass frame.
3. Water an electric saving type, 15% water can ba saved compared to the old type, 20% electric can be saved but the output of water can be guaranteed.
4. Automatically cut the power if the over current happened.
5. Low water protection, power will be cut off if the water level beneath the heating tubes.
6. A utility patent has been obtained.
MODEL |
WD-LH5 |
WD-LH10 |
WD-LH20 |
Output |
5 liters/hour |
10 liters/hour |
20 liters/hour |
Power supply |
AC220V/50Hz |
AC380V/50Hz |
AC380V/50Hz |
Consumption |
3.5 KW |
6 KW |
12 KW |
N.W. |
8 kg |
11 kg |
16 kg |
Dimension(mm) |
410×270×960 |
440×310×1070 |
460×330×1120 |
Transport dimension(mm) |
790×330×370 |
840×370×400 |
870×400×400 |
Weight with full water |
11 kg |
16 kg |
25 kg |
PH. Value |
5-7 |
5-7 |
5-7 |