Water Distiller are sturdily constructed in rustproof, heavy gauge stainless steel for use in rugged condition. Its a unique vessel that generates steam under pressure and temperature between 120°C to 135°C. On reaching the right temperature the instruments are subject to a saturated steam environment for a pre-specified time which results in safe and guaranteed sterilization. Available in various models and sizes from 6 liters capacity to 150 liters capacity to suit different application. These can be used on electricity as well as on any external heat source such as kerosene stove, gas burner, wood & charcoal.
Remember!Purified water is not distilled water!
Autoclave must use distilled water as the working medium. Even pure water, it also contains various minerals,
evaporation at high temperatures will produce scale. Over time, the accumulation of scale will be causing the
steam leak, causing a small pipe jam, pressure and temperature sensor failures etc. While in chamber with the
hole sterilizing equipment, scale easy to jam into the small pipes and bearings, to make equipment performance
degradation, which affects using life. This shows the importance of using distilled water.
Clinics, hospitals, laboratories and other occasions often use a little of distilled water, it's the best way to get
distilled water by SUN-F-I. You just need to fill into the ordinary tap water, and then you can get high-quality
distilled water! Everything so easy!
specification:
VOLTAGE |
POWER |
TANK CAPACITY |
INSIDE DIMENSIONS |
OUTLINE DIMENSIONS |
OUTSIDE DIMENSIONS |
G.W |
220V50Hz |
750W |
4 |
180*200mm |
230*380 |
290*260*450mm |
3.5kg |